Name: Wahoo Computer Mount
Brand: Morsadesigns
SKU: AS-W100O
Price: 30.0 USD
Availability: InStock

Garmin Computer Adapter

AD-G100B

$10.00

Shipping calculated at checkout.

Mount your computer Out front and Center of the bars. Slide and Rotate to eliminate glare and optimize the viewing angle

Works with GARMIN® EDGE 200, 500, 800, 1000, Touring series computers.

Features

Cycling Computer Adapter works with GARMIN® EDGE 200, 500, 800, 1000, Touring series computers.
Slide and Rotate: Slide and Rotate your computer to most positions.
Eliminate Glare: Rotate your computer to Eliminate Glare.
Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
Torque not to exceed 1.6Nm/14inlbs

Made from a CARBON composite Nylon
Weight 8g
Designed, Engineered and Made in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Wahoo Computer Adapter

AD-W100B

$10.00

Shipping calculated at checkout.

Mount your computer Out front and Center of the bars. Slide and Rotate to eliminate glare and optimize the viewing angle.

Works with WAHOO® Element Roam and Element Bolt series computers.

Features

Cycling Computer Adapter works with WAHOO® Element Roam and Element Bolt series computers.
Slide and Rotate: Slide and Rotate your computer to most positions.
Eliminate Glare: Rotate your computer to Eliminate Glare.
Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
Torque not to exceed 1.6Nm/14inlbs

Made from a CARBON composite Nylon
Weight 8g
Designed, Engineered and Made in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Bryton Computer Adapter

AD-B100B

$10.00

Shipping calculated at checkout.

Mount your computer Out front and Center of the bars. Slide and Rotate to eliminate glare and optimize the viewing angle.

Works with BRYTON® Rider 10, 15, 320, 420, 530, 860 series computers.

Features

Cycling Computer Adapter works with BRYTON® Rider 10, 15, 320, 420, 530, 860 series computers.
Slide and Rotate: Slide and Rotate your computer to most positions.
Eliminate Glare: Rotate your computer to Eliminate Glare.
Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
Torque not to exceed 1.6Nm/14inlbs

Made from a CARBON composite Nylon
Weight 8g
Designed, Engineered and Made in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Polar Computer Adapter

AD-P100B

$10.00

Shipping calculated at checkout.

Mount your computer Out front and Center of the bars. Slide and Rotate to eliminate glare and optimize the viewing angle.

Works with Polar® M460 and V650 cycling computers.

Features

Cycling Computer Adapter works with Polar® M460 and V650 cycling computers.
Slide and Rotate: Slide and Rotate your computer to most positions.
Eliminate Glare: Rotate your computer to Eliminate Glare.
Optimize the Viewing Angle: Rotate and Slide the computer to your Optimum-Viewing Angle.
Torque not to exceed 1.6Nm/14inlbs

Made from a CARBON composite Nylon
Weight 8g
Designed, Engineered and Made in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Camera & Light Adapter

AD-CL100B

$10.00

Shipping calculated at checkout.

Mount your Action Camera or Cycling Light Out front and Center using our Camera/Light adapter. Its a three tab design that is compatible with any action camera or light that has a two tab adapter and uses a M5 bolt. Mount your camera or light right side up, upside down, slide it forwards and backwards or rotate it to capture all your experiences on video or light up the night.

Works with all GoPro® Hero Cameras, Action Cameras and Lights

Features

Camera and Light Adapter works with all GoPro® Hero and other style Action cameras and Cycling Lights.
Positions your Camera or Light Out front and Center
Camera can be mounted facing forward or backwards
Rotate and Slide your Camera to capture different views
Mounts Upside down or Right side up
Torque not to exceed 1.6Nm/14inlbs.

Made from a CARBON composite Nylon
Weight 15g
Designed, Engineered and Made in the U.S.A

Recommendations

We recommend mounting the Camera adapter in the middle to the back of the mount for better stability.

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Universal Adapter

AD-U100B

$10.00

Shipping calculated at checkout.

Mount any 31.8mm bar mountable device on the Universal Adapter. Mount Cycling Computers, Lights and Sport Watches, such as NITERIDER®, CYGOLITE®, EXPOSURE®, CATEYE®, APPLE® and POLAR®.

Features

Mount any 31.8mm bar mountable device on the Universal Adapter
Mount a Light Out front, Center and lower to the ground for improved lighting
Mount your Cycling Computer or Sport Watch Out front
Torque not to exceed 1.6Nm/14inlbs

Made from a CARBON composite Nylon
Weight 12g
Designed, Engineered and Made in the U.S.A

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Camera Adapter

AD-GP100B

$10.00

Shipping calculated at checkout.

Get your Camera off the bars and Out front and Center. Mount it right side up, upside down, slide it forwards and backwards or rotate it to capture all your experiences on video. Easily remove and attach the camera with the quick release adapter.

Works with all GoPro® Hero Cameras and Action Cameras

(Note: Cameras require the use of a GoPro® buckle to mount to our adapter.)

Features

Camera Adapter works with all GoPro® Hero Cameras and Action Cameras
Positions your Camera Out front and Center
Camera can be mounted facing forward or backwards
Rotate and Slide your Camera to capture different views
Mounts Upside down or Right side up
Easily remove and attach the camera with the quick release adapter
Torque not to exceed 1.6Nm/14inlbs.

Made from a CARBON composite Nylon
Weight 15g
Designed, Engineered and Made in the U.S.A

Recommendations

We recommend mounting the Camera adapter in the middle to the back of the mount for better stability.

Instructions

Mounting Arm

Mount onto the handle bar to the left or right of the stem and tighten with a 3mm Hex wrench.
Torque not to exceed 1.6Nm/14inlbs.

Adapters

Remove the bolt and washer from the adapter and install into the mounting arm slot.
Thread on the adapter with the washer on the opposite side flush against the bolt head.
Torque to no more than 1.6Nm/14inlbs using a Hex wrench.
Apply a small amount of Blue LOCTITE® #242 to the threads of the adapter bolt if needed to keep it from coming loose.

Carbon Fiber Stem Mount

Replace the stem’s screws (the bottom left and right), by inserting the spacer first, then the mount, washer and finally the long black Titanium screws.
Don’t use excessive force it may break the product and void the warranty.
Tighten the screws using the torque suggested by your stem manufacturer approx. 2 to 3Nm and lube the bolt with anti-seize grease.
Check holes for alignment between front clamp & stem. If there is an alignment mismatch top to bottom, the screw can undergo abnormal stresses and could break.
Before tightening make sure that the titanium screw penetrates the stem with full thread engagement. If screws don’t fully engage, please contact us.

Currency

Wahoo Computer Mount